Jetson Orin Nano and Orin NX hardware
What is a Jetson carrier board?
What it adds to the module, and what to check.
For engineers new to Jetson hardware: what a carrier board adds to an Orin Nano or Orin NX module, how NVIDIA's developer kit carrier compares with other carriers, and what to check before you choose one. Every NVIDIA figure links to the NVIDIA page it comes from.
Figures checked against NVIDIA documentation on 14 November 2026
01 - What it is
The board a Jetson module plugs into.
A Jetson carrier board is the circuit board a Jetson module plugs into. The module holds the GPU, CPU and memory. The carrier board powers it and brings its interfaces out to connectors: USB, Ethernet, display, camera, M.2 storage and the 40-pin header. A module cannot run without one.
NVIDIA's FAQ describes the same split: a module ships with no software, goes onto a carrier board designed or bought for your product, and is then flashed.
A carrier board is built for one module connector. The Orin Nano and Orin NX use a 260-pin SO-DIMM connector. Jetson AGX Orin is a larger module with a 699-pin connector (NVIDIA's Jetson Orin page) and needs a different carrier. This guide covers Orin Nano and Orin NX carriers.
02 - The module on its own
What the module has, and what it leaves to the carrier.
NVIDIA lists these figures for the production Orin Nano and Orin NX modules. The interfaces are signals on the module's connector, not ports you can plug into.
| Item | Orin Nano 4GB and 8GB | Orin NX 8GB and 16GB | Source |
|---|---|---|---|
| Size | All four: 69.6 mm x 45 mm | NVIDIA Jetson Orin | |
| Connector | All four: 260-pin SO-DIMM | NVIDIA Jetson Orin | |
| Storage | All four: No onboard storage listed; supports external NVMe | NVIDIA Jetson Orin | |
| USB | All four: 3x USB 3.2 Gen2 (10 Gbps), 3x USB 2.0 | NVIDIA Jetson Orin | |
| Ethernet | All four: 1x GbE | NVIDIA Jetson Orin | |
| PCIe | 1 x4 + 3 x1, PCIe Gen3 | 1 x4 + 3 x1, PCIe Gen4 | NVIDIA Jetson Orin |
| Camera | All four: 8 lanes MIPI CSI-2, up to 4 cameras | NVIDIA Jetson Orin | |
| Display | 1x 4K30 multi-mode DP 1.2 (+MST) / eDP 1.4 / HDMI 1.4 | 1x 8K30 multi-mode DP 1.4a (+MST) / eDP 1.4a / HDMI 2.1 | NVIDIA Jetson Orin |
| Software | All four: None installed when it ships | NVIDIA Jetson FAQ | |
NVIDIA lists one connector, so power and every interface pass through the 260-pin edge. NVIDIA's Quick Start lists QSPI-NOR and a USB or NVMe drive as what gets flashed for these modules, so the carrier has to provide the drive. And the carrier decides which interfaces become connectors: the one multi-mode display output can come out as DisplayPort, HDMI or eDP.
Carriers also trade interfaces against each other. NVIDIA's bring-up guide says the Orin NX and Orin Nano support up to three SuperSpeed USB ports, but some designs cannot use all three because the UPHY lanes are shared among PCIe, UFS and USB. Two carriers for the same module can offer different mixes of USB ports and M.2 slots.
03 - What it adds
What the carrier board adds.
Power
The carrier takes power from a DC jack, USB-C Power Delivery or a battery, and feeds the module and the ports. Its power design has to cover the power mode you plan to run.
Connectors
Everything you plug in is on the carrier: USB ports, the Ethernet jack, the display connector, camera connectors, M.2 slots for NVMe storage and Wi-Fi, and the 40-pin expansion header for GPIO, I2C, I2S, SPI and UART.
Flashing and recovery
A module is flashed from a host computer. NVIDIA's flashing guide has you connect the host to the Jetson's recovery port with a USB cable and put the board in Force Recovery Mode. The carrier provides that USB port and the recovery and reset controls.
Mounting and cooling
The carrier holds the module and sets the outline, mounting holes and connector positions your enclosure has to match. It also carries the fan header, and its layout decides which heatsink and fan fit over the module.
04 - Developer kit and other carriers
NVIDIA's developer kit carrier and other carriers.
NVIDIA's Jetson Orin Nano Developer Kit is a P3767 module on a P3768 reference carrier board (NVIDIA's bring-up guide). NVIDIA lists these connectors and dimensions for the kit:
| Item | NVIDIA developer kit carrier | Source |
|---|---|---|
| USB | 4x USB 3.2 Type-A (10Gbps, host only), 1x USB-C for data with host, device and recovery modes | Developer kit user guide |
| Ethernet | Gigabit Ethernet port | Developer kit user guide |
| Display | DisplayPort output connector, the kit's only display output | Developer kit user guide |
| Camera | 2x MIPI CSI connectors, 22-pin, 0.5 mm pitch | Developer kit user guide |
| M.2 | Key-M 2280 (PCIe 3.0 x4), Key-M 2230 (PCIe 3.0 x2), Key-E 2230 with the included wireless module | Developer kit user guide |
| Headers | 40-pin expansion header, 12-pin button header, 4-pin fan header | NVIDIA Jetson Orin |
| Power | DC power jack, 5.5 mm x 2.5 mm | Developer kit user guide |
| Size | 100 mm x 79 mm x 21 mm, including feet, carrier board, module and thermal solution | NVIDIA Jetson Orin |
Linux for Tegra (L4T) supports this pairing as shipped: NVIDIA's Quick Start lists each production Orin Nano and Orin NX module on the P3768-0000 carrier, with a ready-made flash configuration. NVIDIA's FAQ says developer kits are for developing and testing software, not for production use, and lists a one-year warranty for development use only.
Carriers from other makers take the same modules into products. NVIDIA's FAQ says its ecosystem partners offer production-ready carrier boards, supporting I/O including MIPI CSI-2, GMSL, Ethernet, USB, HDMI and PCIe. They differ in size, power input and which module interfaces they bring out, and each needs its own board support package (section 05).
05 - What to check
What to check before you choose one.
Supported modules, by NVIDIA part number
Ask for the supported modules by NVIDIA part number, not only by name. One name can cover more than one part: NVIDIA's Quick Start lists the production Orin Nano 8GB as P3767-0003, and the developer kit's module, which has a microSD card slot, as P3767-0005, a development module. NVIDIA's FAQ lists the Orin Nano and Orin NX as pin and form-factor compatible with each other, but notes there may be interface differences when one carrier supports several modules.
Power input
Check the input connector, the voltage range and how the board will be powered in use: bench supply, USB-C Power Delivery or battery. For Super Mode, NVIDIA's FAQ says an Orin NX carrier board must have an HV rail, so ask the maker if the carrier supports it. Our Super Mode guide covers what it asks of the carrier and cooling.
The I/O you need
List what you will connect: cameras and their lane counts, the display and its connector, USB devices, Ethernet, and M.2 storage and wireless. Check that list against the carrier's I/O, not the module's.
Software support
L4T supports NVIDIA's own carrier as shipped. For any other carrier, NVIDIA's bring-up guide says the kernel device tree, MB1 and MB2 configuration, ODM data and flashing configuration must be changed to match the board. That work is the carrier's board support package (BSP).
Ask who maintains the BSP, which L4T and JetPack releases it is built for, and how the board is flashed. JetPack is built on L4T, so the BSP's L4T release sets which JetPack the board can run (how to check both versions).
Size and mounting
Get the board outline, mounting hole positions and connector heights, and check them against your enclosure, heatsink and cable routing.
06 - Where the CB302B fits
Where the CB302B fits.
The CB302B Jetson Orin Nano and Orin NX carrier board takes the Jetson Orin Nano 4GB, Orin Nano 8GB, Orin NX 8GB or Orin NX 16GB, listed by NVIDIA part number on its product page. It runs Linux for Tegra (L4T) with JetPack and native LineageOS 24 / Android 17 (beta). It supports Orin Super Mode.
Power comes in over USB-C PD, or from a genuine Milwaukee M12 pack (3Ah, 6Ah or 9Ah) that you supply. Curve does not sell battery packs. Video goes out as DisplayPort over USB-C, with no HDMI port. The 40-pin header and the two 22-pin camera connectors use the same formats found on the NVIDIA Jetson Orin Nano Developer Kit. Type-C 2 carries USB debug and flashing support, and a button header brings out force recovery and reset.
The bare board ships without a module, for people who already have one. The Curve Developer Kit comes with a module we source, or you can bring your own. Both are on our Jetson carrier boards page. Not every module part revision is confirmed yet, so send us your module's part number before you reserve.
As published on /products/cb302b
07 - Questions
Questions about carrier boards.
Can a Jetson module run without a carrier board?
No. NVIDIA lists one connector for these modules, the 260-pin SO-DIMM edge, and power and every interface pass through it.
Does a carrier board for the 2019 Jetson Nano take an Orin module?
Only if its maker lists the Orin modules. NVIDIA's FAQ lists the Orin Nano and Orin NX as form-factor compatible with the Jetson Nano, TX2 NX and Xavier NX, but not pin compatible. The CB302B takes the four Orin modules named in section 06, and not the 2019 Jetson Nano.
Does the carrier board change the module's performance?
The GPU, CPU and memory are on the module, and NVIDIA's performance figures are module figures. The carrier decides how much of that you can sustain, through its power design and the cooling it allows. For Super Mode, NVIDIA's FAQ says customers may need to redesign carrier boards and thermal solutions (what Super Mode asks of a carrier board).
08 - Sources
Sources.
Every NVIDIA figure on this page comes from one of these NVIDIA pages, checked on 14 November 2026. CB302B details are as published on our product pages.
NVIDIA
- Jetson Orin
Module size, connector, storage and interfaces; developer kit size and headers
- Jetson FAQ: developer kits and modules
Modules ship with no software and go on a carrier board
- Jetson FAQ: developer kits in production
Developer kits are not for production use
- Jetson FAQ: module compatibility
Pin and form-factor compatibility between modules
- Jetson FAQ: partner production systems
Production-ready carrier boards from ecosystem partners
- Jetson FAQ: partner development systems
The I/O partner carrier boards support
- Jetson FAQ: enabling Super Mode
The HV rail an Orin NX carrier board needs for Super Mode
- Orin Nano Developer Kit user guide: hardware layout
Ports and connectors on NVIDIA's reference carrier board
- L4T r36.5 Quick Start: modules and configurations
P3767 module part numbers on the P3768-0000 carrier, and the drives each configuration flashes
- L4T r36.5 module bring-up: board configuration
What changes for a carrier board other than P3768
- L4T r36.5 module bring-up: USB
SuperSpeed USB ports and UPHY lane sharing
- L4T r36.5 flashing support
The USB recovery port and Force Recovery Mode
09 - Next
Reserve a CB302B for your Orin module.
Reserve a board for the Orin Nano or Orin NX module you have, or start by choosing one. Not every module part revision is confirmed yet, so send us your module's part number before you reserve. We take reservations, not orders, and no payment is taken.
Figures checked against NVIDIA documentation on 14 November 2026. Re-check at the next JetPack release.
Curve Reality - Rev 2026.04
Designed in New Zealand