Get launch updates
Reserve now · no payment taken

CB302B Carrier Board for Jetson Orin Nano and Orin NX

The board inside every Curve, on its own. A carrier for NVIDIA Jetson Orin Nano and Orin NX with battery power, DisplayPort over USB-C, stereo speakers, a microphone and a 9-axis IMU.

Final price to come. No payment is taken when you reserve. Module and SSD not included. SKU CR-CB302B

3D model of the CB302B carrier board in its frame, with a Jetson module, fan and NVMe SSD fittedModule and SSD shown, not included

What you get

More than a bare PCB.

The CB302B ships in its frame with sound, wireless and power sorted. You bring the Jetson module and the storage.

  • CB302B carrier board

    For Jetson Orin Nano and Orin NX. The module socket is left open for you.

  • Frame

    Injection-moulded ABS, with mounting points along the edges and corners.

  • Speakers and microphone

    Left and right stereo speakers and a microphone, already fitted.

  • Wi-Fi and Bluetooth

    RTL8822CE module in the M.2 Key E slot, with antenna.

  • Power

    A 65 W USB-C power supply and the connector adapter for M12 battery power.

  • Quick-start card

    With a QR code that opens the online documentation.

You add one of the four supported Jetson Orin modules, an NVMe SSD and, if you want to run untethered, a genuine Milwaukee M12 battery pack.

Options

Reserve the board. Add what you need.

Start with the board and choose whether to add a desktop housing, a battery locking housing and the carry case. Reserving holds your place in the first production run.

CB302B Carrier BoardPrice TBCThe board in its frame, with stereo speakers, microphone, and Wi-Fi and Bluetooth fitted. Always included.

Not included with the board: a Jetson Orin module, an NVMe SSD and a battery pack. Want those fitted for you? That is the Curve Developer Kit

The compact desktop housing lifting off the CB302B carrier boardCB302B in the desktop housing

Optional housings

From bench board to desktop unit.

Add a housing and the board becomes a closed, compact computer. The desktop housing is for the desk. The battery locking housing holds a Milwaukee M12 pack underneath, so it runs anywhere. Both have a brick-compatible surface and sides, come with the Developer Kit, and lift off again when you need the headers.

  • MaterialInjection-moulded ABS
  • CoolingVents for the fan and airflow
  • Desktop housing+ $79, provisional
  • Battery locking housingPrice to be confirmed. Battery pack not included

Ports and headers

Know every connection.

The 40-pin header and both camera connectors use the same formats as the NVIDIA Jetson Orin Nano Developer Kit, and every pin is labelled on the board.

  • The Type-C 1 connector on the edge of the CB302B

    DisplayPort over USB-C

    Type-C 1 carries DisplayPort Alt Mode, USB 3.2 Gen 2 and 5 V power out. One cable to your display.

  • The second USB-C connector, labelled POWER on the frame

    Charge and debug

    Type-C 2 takes USB-C PD up to 45 W (15 V / 3 A) and doubles as the USB debug and flashing port.

  • Two USB-A ports beside the Ethernet jack

    USB-A and Gigabit Ethernet

    Two USB-A ports and RJ45 Gigabit Ethernet for peripherals and wired networks.

  • The Jetson Orin module beside the two camera connectors

    Two cameras

    Dual 22-pin MIPI CSI connectors, in the same format as the NVIDIA Jetson Orin Nano Developer Kit.

  • The Wi-Fi module and an NVMe SSD on the underside of the board

    Storage and wireless

    M.2 Key M for NVMe SSDs up to 2280, tested from 256GB to 4TB. M.2 Key E with Wi-Fi and Bluetooth fitted.

  • The 40-pin header with its silkscreen pin labels

    40 pins. Room to build.

    GPIO, I²C, SPI, I²S and UART in the Orin Nano Developer Kit format, with every pin labelled on the board.

  • The service header at the edge of the board

    Recovery, UART and CAN

    A service header for force recovery, reset and UART debug, plus a CAN header (reserved).

  • The audio section of the CB302B

    Sound on board

    Left and right stereo speakers and a microphone are part of the board, so voice projects need nothing extra.

  • The IMU area of the CB302B

    Motion sensing on board

    A BMI270 IMU and BMM150 magnetometer give you nine axes, enabled on Linux by the Hardware Extras package.

Supported modules

Your choice of Orin.

Use the CB302B as a Jetson Orin Nano carrier board or a Jetson Orin NX carrier board. One board takes four NVIDIA Jetson modules: fit the one your project needs, and move up later without replacing anything else.

ModuleNVIDIA part number
NVIDIA Jetson Orin Nano 4GB900-13767-0040-000
NVIDIA Jetson Orin Nano 8GB900-13767-0030-000
NVIDIA Jetson Orin NX 8GB900-13767-0010-000
NVIDIA Jetson Orin NX 16GB900-13767-0000-000

Not supported: Jetson AGX Orin, and earlier modules including Xavier, TX1, TX2, TX2 NX and the original 2019 Jetson Nano. Not every module part revision is confirmed yet, so if you plan to fit a module you already own, send us its part number before you reserve.

Software

Linux and Android on the same hardware.

Run Linux for Tegra with NVIDIA JetPack on any of the four modules, or CurveOS, our native Android, on the Orin Nano 8GB and Orin NX 16GB. With both installed it dual boots, so you choose one when you turn it on.

  • Linux for Tegra (L4T) with NVIDIA JetPack

    Supported

    Ubuntu-based Linux with CUDA, cuDNN and TensorRT for GPU-accelerated AI. ROS compatible.

  • CurveOS / Android 17

    Beta

    Native Android on the Jetson Orin Nano 8GB and Orin NX 16GB, with GPU acceleration. Dual boots with Linux for Tegra. Formerly LineageOS 24.

  • Windows 11 ARM

    Experimental

    Runs in a virtual machine on Linux for Tegra.

Specifications

CB302B technical specifications.

Printable datasheet

Processor support

  • NVIDIA Jetson Orin Nano 4GB and 8GB
  • NVIDIA Jetson Orin NX 8GB and 16GB
  • Supports Orin Super Mode
  • Module socket left open, so you can fit and upgrade the module yourself

USB and display

  • Type-C 1: DisplayPort Alt Mode, USB 3.2 Gen 2, USB 2.0, 5 V power output
  • Type-C 2: USB-C PD input up to 45 W (15 V / 3 A), USB debug and flashing
  • 2 × USB-A
  • No HDMI port

Network

  • RJ45 Gigabit Ethernet
  • M.2 Key E slot for Wi-Fi / Bluetooth
  • RTL8822CE Wi-Fi + Bluetooth module and antenna included

Storage

  • M.2 Key M slot for NVMe SSD
  • 2280, 2260 and 2242 form factors
  • Tested with drives from 256GB to 4TB

Cameras and audio

  • 2 × 22-pin FPC camera connectors (MIPI CSI)
  • Same camera connector format as the NVIDIA Jetson Orin Nano Developer Kit
  • Left and right stereo speakers
  • Microphone

Sensors

  • 9-axis IMU: BMI270 + BMM150
  • Battery gauge
  • Enabled on L4T by the Hardware Extras package

Power

  • USB-C PD: up to 45 W (15 V / 3 A)
  • Genuine Milwaukee M12 packs: 3Ah, 6Ah or 9Ah (bring your own)
  • Internal bridge keeps the board powered while you change packs
  • Battery power connector adapter included

GPIO and headers

  • 40-pin header: UART, I²C, SPI, I²S, GPIO
  • Same 40-pin format as the NVIDIA Jetson Orin Nano Developer Kit
  • Service header: force recovery, reset, UART debug
  • CAN: 4-pin 2.54 mm header (reserved)
  • RTC: 2-pin 1.25 mm header (reserved)

Thermal

  • 4-pin 5 V fan connector
  • PWM speed control

Mechanical

  • Injection-moulded ABS frame
  • Edge and corner mounting points
  • Designed for integration into custom enclosures
CB302B PCB top view, silkscreen drawing
PCB top view
CB302B PCB bottom view, silkscreen drawing
PCB bottom view
The underside of the CB302B in its frame, showing the NVMe SSD and Wi-Fi module

Volume and OEM

Designing it into a product?

The CB302B is built for deployment as well as development. Talk to us about volume pricing, lead times and customisation. Technical questions go straight to engineering.

Talk to the team

Questions

About the CB302B.

Does the CB302B come with a Jetson module?

No. The board ships without a Jetson module, an NVMe SSD or a battery. It is designed for the Jetson Orin Nano 4GB, Orin Nano 8GB, Orin NX 8GB and Orin NX 16GB. If you want those fitted for you, that is the Curve Developer Kit.

What do I need to add?

One of the four supported Jetson modules, an NVMe SSD for the M.2 Key M slot (2280, 2260 or 2242), and power from a genuine Milwaukee M12 pack or 45 W USB-C PD. If the module is one you already own, send us its part number before you reserve.

How do I connect a display? Is there an HDMI port?

Video comes out over USB-C using DisplayPort Alt Mode on Type-C 1. Type-C 2 is the USB-C PD power input and debug port. There is no HDMI port on the board.

What are the power options?

Genuine Milwaukee M12 battery packs (3Ah, 6Ah or 9Ah, which you supply) or 45 W USB-C PD on Type-C 2. An internal bridge keeps the board powered while you change packs. Runtime depends on the module, power mode, workload and pack.

Is it ROS compatible?

Yes. The CB302B runs Linux for Tegra (L4T) with NVIDIA JetPack, so you can build ROS projects on it.

What happens when I reserve?

Your reservation joins the waitlist and no payment is taken. We email you with final pricing and lead time when boards are ready to ship. The prices shown here are provisional.

Do you offer volume pricing or customisation?

Yes. Tell us about your project and quantities and the founding team will reply. Technical questions go straight to engineering.

Reserve now

Reserve a CB302B.

Final price to come. No payment is taken when you reserve.

Choose your options
Coming soon

Want it assembled?

The Curve Developer Kit adds the Jetson module, the SSD, both housings and the carry case.

See the Developer Kit