Get launch updates

Laid out to print on two sheets of A4 or Letter paper. Full specifications

Curve Reality®

Technical Specifications

CB302B Carrier Board

Rev 3.0 | September 2026

NVIDIA Jetson Carrier Boards - Hot-Swappable Batteries • DisplayPort over USB-C • Native Linux • Native CurveOS / Android 17 (beta)

CB302B Platform

CB302B

  • Jetson Orin Nano / Orin NX
  • Native L4T · Native CurveOS / Android 17 (beta)
  • DisplayPort over USB-C only - no HDMI
  • Hot-Swap BatteryMilwaukee M12
  • USB-C DisplayPortAlt Mode Output
  • Dual BootLinux L4T / CurveOS
  • WiFi 5 + BTRTL8822CE Module
  • NVMe StorageM.2 Key M Slot
  • 45W USB-C PDPower Delivery

CB302B Carrier Board

For NVIDIA Jetson Orin Nano / Orin NX

Processor Module

SOM CompatibilityOrin Nano 4GB/8GB, Orin NX 8GB/16GB
Super ModeNVIDIA Orin Super mode supported
Native OSLinux (L4T), NVIDIA JetPack SDK
Additional EnvironmentsNative CurveOS / Android 17 (beta) on Orin Nano 8GB and Orin NX 16GB, dual boot with L4T
Display OutputDisplayPort Alt Mode over USB-C only - no HDMI

USB Type-C Ports

USB-C Port 1DisplayPort Alt Mode, USB 3.2 Gen2, USB 2.0, 5V power output
USB-C Port 2Power Delivery (45W max, 15V/3A), USB debug with flash support

Networking

Ethernet1 Gbps RJ45
WirelessM.2 Key E slot, RTL8822CE WiFi 5 + Bluetooth (included with antenna)

Storage & Expansion

NVMe SSDM.2 Key M (2280/2260/2242 form factors)
CameraDual 22-pin FPC connectors (same connector format as the Orin Nano Developer Kit)
GPIO Header40-pin (UART, I2C, SPI, GPIO), same header format as the Orin Nano Developer Kit
Debug HeaderForce recovery, reset, UART debug
CAN Bus4-pin 2.54mm header (reserved)
RTC2-pin 1.25mm header (reserved)

Audio

SpeakersStereo (Left + Right channels)
MicrophoneOnboard (TBD)

Platform Specifications

Power System

  • Milwaukee M12 packs: 3Ah, 6Ah or 9Ah (not included)
  • Hot-swappable battery support
  • Power connector adapter included
  • USB-C PD input: 45W (15V/3A max)

Input ratings are supply limits, not measured system consumption. Power draw and battery runtime depend on the module, power mode, workload, peripherals and battery pack. Contact Curve Reality for build-specific power guidance.

Thermal Management

  • 4-pin fan connector (5V)
  • PWM speed control

Mechanical

  • Injection-moulded ABS mounting frame
  • Fits the desktop and battery locking housings
  • Mounting hardware included

Package Contents

  • Carrier Board
  • 65W USB-C Power Supply
  • Wi-Fi/BT Module + Antennas
  • M12 Power Connector Adapter
  • Mounting Hardware
  • Quick Start Card (QR code)

Not included: Jetson module, NVMe SSD, battery

Software Support

  • NVIDIA JetPack SDK
  • Linux for Tegra (L4T)
  • Native CurveOS / Android 17 (beta) on Orin Nano 8GB and Orin NX 16GB
  • Dual boot: L4T or CurveOS at start-up
  • Online documentation

Certifications

  • FCC (pending)
  • CE (pending)
  • RoHS compliant

Curve Reality®

curvereality.com

For latest specifications and documentation:

curvereality.com/docs